The VCX device is adapted to OEM diagnostic software through diagnostic drivers. Once the drivers are installed, the VCX can be recognized by the software and enable OEM diagnostic functions. 1. Requirements for Installing Diagnostic Drivers: The OEM diagnostic software must already be installed...
The VCX device is adapted to OEM diagnostic software through diagnostic drivers. Once the drivers are installed, the VCX can be recognized by the software and enable OEM diagnostic functions.
1. Requirements for Installing Diagnostic Drivers:
2. Software Installation Requirements
Download Links :
Software Installation Steps V1.8.9.0601 :
Run the Installer Double-click to run the VX Manager installer.
Begin Installation On the welcome screen, click "Next" to continue.
Select Installation Components During this step, you can select the OEM diagnostic drivers you wish to install, or you can use VX Manager after installation to freely install the required OEM drivers.
Installation in Progress The installation process may take several minutes. Please be patient.
Installation Complete On the installation completion screen, click "Finish" to complete the process.
After installation, a VX Manager shortcut will be created on the desktop and in the Start menu.
When you launch the VX Manager software, the [Device Management] screen will display the basic information of the device:
| Basic Functions | Description |
|---|---|
| ReConnect | To establish a connection with the device |
| Firmware | Upgrade device firmware from server |
| License | Update device license from server |
| Restart | Reset device and start to run |
| Self Test | Run device test program and report |
| HW Test | Device LED flashing and buzzer beep |
Password: kyaxis
From all orders over $10
Shop with an expert
Refer a friend
Free return over $200
100% Protected
REVIEWS
"Plugged into my programmer and it was recognized instantly. Cable length is just right and the strain relief at the connectors looks like it'll hold up to daily use."
"Works as expected. The cable could be a bit longer for my setup but it gets the job done. No connection issues so far."
"Works as expected. The cable could be a bit longer for my setup but it gets the job done. No connection issues so far."
"Came in faster than expected and the chip was already in good shape. Programmed using Xhorse VVDI without any issues. Customer was a walk-in and I had her out in 30 minutes."
"Decent quality for the price."
"Functional, decent build."
"Good replacement remote. Programming was straightforward with my CGDI. Range is acceptable — not quite OEM but close enough that no one's complaining."
"Ordered this for a customer who lost both keys to her Keydiy KD. The all-keys-lost procedure went smoothly with my Lonsdor K518 and the new remote paired up clean. Cut the blade on my Triton and it slid in like butter. Customer was thrilled to save almost half what the dealer quoted her. KeyAxis is reliable — this is probably my eighth or ninth order with them."
"Solid OEM-grade key. The blade was cut to spec by my machine no problem and it locked/unlocked from a good distance. Definitely cheaper than going through the dealer."
"Functional, looks slightly different from original."
"Solid OEM-grade key. The blade was cut to spec by my machine no problem and it locked/unlocked from a good distance. Definitely cheaper than going through the dealer."
"Picked this up for a Kia K8 job and it programmed without any drama. Cut clean on my Condor and the customer drove off happy. Will keep these on hand."
"Buttons feel tight, range is excellent."
"Buttons feel tight, range is excellent."
English
Español
Français
