| SKU: | AX08560 |
| Condition: | New |
| Proximity: | No |
| Panic Button: | No |
| Weight: | 0.01 kg |
| Categories: | Accessories, Soldering Tools |
| Manufacturer: | Bestool |
BST- 3515A soldering wick Desoldering Braid Solder Wire 3.5mm Suction-line1.5m Length Wick/Soldering Accesso
1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove the desoldering wick after the solder has been absorbed.
3. Cut off the used section of the wick using nippers.
4. Repeat steps 1, 2, and 3 if the solder is not removed completely. Absorbability may vary by solder type. Sn63 Percent and 60 Percent (tin content) have good absorbability.
1. High-quality alloy copper wire from the precision weaving.
2 . For the removal of tin in the excess solder, resistance to oxidation and corrosion.
3. Thermal conductivity, tin effect is very good, tin suction is clean, and low residue.
4 . Suitable for precision circuit use.
| SKU | AX08560 |
| Condition | New |
| Manufacturer | Bestool |
| Released Year | 2025 |
| Warranty | International |
| Weight | 0.01 kg |
REVIEWS
"Plugged into my programmer and it was recognized instantly. Cable length is just right and the strain relief at the connectors looks like it'll hold up to daily use."
English
Español
Français
