XTOOL KS-1 Blue Smart Key Emulator Support All Key Lost For Toyota/Lexus Compatible with X100 PAD3 / PAD2 Pro / PS90

The XTOOL KS-1 is a five-in-one smart key simulation card designed to eliminate the need to disassemble the smart box or other vehicle modules. By reading the original vehicle data through the OBD port, it generates a simulation card that allows the ignition to be turned on and enables smart key clearing and programming functions.

XTOOL KS-1 Features :

Toyota/Lexus All-Keys-Lost Solution (No Disassembly Required)
Supports all-keys-lost situations without removing vehicle modules.

OBD Data Reading & Emergency Key Simulation
Reads original vehicle data via OBD to generate an emergency simulation key, allowing the vehicle to be started directly—fast, intelligent, and efficient.

Intelligent Key Generation
Automatically generates new smart keys based on the original vehicle data.

Key Chip Generation, Copying & Simulation
Supports smart key creation and operation according to the standard key-adding process, including chip simulation and duplication.

Wide Vehicle Compatibility
Supports Toyota/Lexus smart key types: 94/D4, 98, 39, 88/A8, A9 in all-keys-lost scenarios with fast matching speed.

Reusable Design
After key matching, turning off the power or removing the battery restores the device to its initial state for reuse.

XTOOL KS-1 Device Compatibility :
Works with:

• X100 PAD3
• X100 PAD2 Pro
• X100 PAD2 (KC100 required)
• XTOOL PS90 (KC100 required)
• XTOOL A80 (KC100 required)

XTool KS-1 Specifications :

1. Powered by a CR2025 battery (3V, 165mAh)
2. Standby current ≤ 2μA
3. Reading and writing frequency: 125 kHz
4. Equipped with one status indicator lamp
5. The indicator lights up for 2 seconds when powered on, then turns off
6. The indicator flashes every 0.5 seconds during reading or writing operations
7. Firmware of the simulation card can be updated using KC100
8. Working temperature range: -20°C to 60°C
9. Storage temperature range: -20°C to 70°C
10. Dimensions: 66 × 40 × 12 mm