Xhorse VVDI Key Tool Plus - Pad + Adapters Kit

The Key Tool Plus is a comprehensive all-in-one security and programming solution designed for professional automotive locksmiths. It eliminates the need for a laptop or mobile phone, allowing technicians to complete a wide range of automotive programming tasks anywhere. It supports full IMMO programming for luxury vehicles, including BMW, Mercedes-Benz, Audi, and Volkswagen, and enables direct control of Xhorse key cutting machines — reducing costs and streamlining the entire workflow.

Powered by an advanced application processor with integrated Bluetooth, FM, WLAN, and GPS modules, the Key Tool Plus delivers a highly integrated baseband platform combining modem and application processing capabilities. This enables reliable simultaneous voice, data, and audio / video transmission for the best possible connectivity experience in any environment

Xhorse Key Tool Plus User Manual

VVDI Key Tool Plus Basic Functions

• Remote and smart key generation
• Remote renewal and unlocking
• Remote cloning
• Transponder programming and IMMO matching
• IC / ID card cloning
• Remote frequency detection
• Transponder detection, cloning, and generation
• IMMO programming support for Jaguar, Land Rover, Porsche, Volvo, Mitsubishi, and additional brands
• Service and maintenance light reset
• Key cutting machine control
• Common vehicle IMMO programming

Key Tool Plus Other Features

• DoIP protocol support
• CAN FD protocol support
• CAN and K protocol switch pin
• Chip pin detection
• Toyota smart key programming without simulator
• Long-distance IMMO data collection
• Built-in OBD matrix switch
• Radio frequency simulator
• Smart key simulator
• Integrated key identification coil
• Mercedes-Benz infrared reading head

Key Tool Plus Latest Update

Added Support for VVDI VW 5C (MQB478)

Expanded Luxury Car Brand Coverage

Full IMMO programming support for major luxury brands:

Volkswagen & Audi

• 3rd, 4th, and 5th generation IMMO systems
• MQB platform
• MED17 and EDC17 engine computers

BMW

• CAS3 / CAS3+
• CAS4 / CAS4+
• FEM / BDC
• ECU ISN reading function

Mercedes-Benz

• FBS3 standard keys and FBS3 keyless-go keys
• Smart key programming including all keys lost, add key, and key enable / disable
• EIS / EZS, ELV, ECU, gearbox, and ISM module replacement

Also supports common mainstream brands including Toyota, Honda, Mazda, Ford, and more.

The Key Tool Plus supports over 20,000 vehicle models worldwide, with IMMO programming models easily accessible through a smart search interface — browse by region, brand name, or A-Z alphabetical search to quickly locate the required vehicle.

The Key Tool Plus also integrates full programmer functionality, supporting reading and writing of common modules and chips across multiple categories including EEPROM and FLASH, IMMO, instrument clusters, airbag modules, and ECUs.

Note: Certain functions require connecting the Key Tool Plus to specific adapters as prompted by the device interface. These functions are exclusively available on the advanced edition.

WHAT WE CAN COMPLETE BY PROG FUNCTION ON KEY TOOL PLUS?

• Support EEPROM reading and writing: support reading & writing most types of transponders in the market.
• Support BMW immo module programming covering CAS3, CAS3+, CAS4, CAS4+, BDC, FRM, and FEM.
• Support Land Rover RFA module reading and immo programming.
• Support Porsche BCM programming.
• Support read ECU with CAN on AUDI, BMW, and VOLKSWAGEN.
• Support Instrument programming on HONDA, KIA, and HYUNDAI.

Improved IMMO Data Tool  File Make Key

Some vehicle models cannot complete key programming or specific settings via the OBD port due to their immobilizer protection systems. The File Make Key function provides a professional alternative programming method to resolve this efficiently.

File Make Key generates a car key from an IMMO data file. The user reads the IMMO data using a compatible device, then generates a boot transponder to start the vehicle directly — without the need to match the original car key. On select models, rewriting the data to the IMMO box may be required during the programming process.

The Key Tool Plus supports the File Make Key function for a wide range of common car models and motorcycles, with easy model lookup by region, brand name, or A-Z search.

Key Cutting Machine Control

The Key Tool Plus can be used as a full operating screen for Xhorse key cutting machines including the Condor, Dolphin, and Panda — eliminating the need to use a mobile phone during key cutting operations for a completely hands-free and streamlined workflow

Key Tool Plus Parameters

• CPU: 8-Core 2GHz
• RAM / Storage: 4GB + 128GB
• Operating System: Android 9.0
• Screen: 10.1-inch HD Anti-Glare / Anti-Fingerprint
• Rear Camera: 13.0MP HD
• Battery: 10,000mAh
• Charging: 30W Super Fast Charge
• Bluetooth: Version 5.0
• Wi-Fi: 2.4GHz / 5GHz Dual-Band

Key Tool Plus Advanced Processor

• 4 × Cortex-A53 up to 2.3GHz
• 4 × Cortex-A53 up to 1.8GHz
• Memory: 4GB RAM
• Storage: 128GB
• Resolution: Up to FHD+ (2,400 × 1,080)

Name of parts

• Light Sensor — Automatically detects ambient brightness for optimal screen adjustment
• Detection Coil — Covers 125K low frequency, 13.56MHz medium frequency, and 300–900MHz high frequency, supporting:
  • Reading, writing, and cloning of common IMMO transponders
  • Reading common ID transponders
  • Reading common IC transponders
  • Frequency detection for common vehicle remotes
• IMMO Transponder Placement Slot — Dedicated slot for vehicle IMMO transponders
• USB Charging Port — Supports standard fast charge adapter and Type-C input at DC 5V
• PS2 Port — For remote key programming
• DB15 Port — Compatible with standard and optional programming adapters
• DB25 Port — For OBD matching
• Mercedes-Benz IR Port — Supports infrared reading of Mercedes-Benz FBS3 and FBS4 smart keys via the Benz IR reader