Xtool InPlus IK618 Automotive Key Programmer Device

The XTOOL InPlus IK618 is a comprehensive key programming and diagnostic solution built for locksmiths and automotive repair shops. With coverage spanning over 90% of global vehicle models across more than 70 manufacturers, it supports a full range of advanced IMMO functions including PIN code reading, key learning, remote programming, dealer key generation, and EEPROM operations.

From BMW CAS1 through CAS4, MQB IMMO key programming for VW, Audi, and Skoda, to Toyota and Lexus key programming via the KS-1 adapter, the IK618 delivers professional-grade results across a wide variety of platforms.

The device also comes equipped with 30+ maintenance service functions including oil reset, EPB, BMS, injector coding, DPF regeneration, and ABS bleeding. Built-in OE-level diagnostics with bi-directional control round out its capabilities. The IK618 supports the KC-100 (included), KC-501, KS-1, KS-2, and CAN FD adapters. Multi-language support and broad vehicle compatibility make it a reliable and versatile tool for daily workshop use.

Xtool InPlus IK618 Automotive Key Programmer User Manual

XTOOL InPlus IK618 Key Programming & Diagnostic Functions

1. Advanced Key Programming Capabilities The IK618 is equipped with a comprehensive set of professional key programming functions, including IMMO data backup, registered key count checking, key fob programming and addition, dealer key generation, remote programming, EEPROM modifications, and write-enable operations. It is well-suited for locksmiths, mechanics, and automotive repair shops of all sizes. Please Note: Function availability may vary by vehicle. Send the VIN for confirmation prior to purchase.

2. KC100 Key Programmer & EEPROM Adapter Included The IK618 comes bundled with the KC100 key programmer and EEPROM adapter at no additional cost, enabling remote frequency reading and dealer key generation for VW, Audi, Fiat, Renault, and Land Rover vehicles.

3. Expandable with KC501, KS-1 & M822 (Sold Separately) When paired with the KC501 programmer, M822 adapter, and compatible cable kits, the IK618 gains the ability to read and write Mercedes-Benz infrared keys. For Toyota vehicles, using the KS-1 key programmer alongside the KC100 and M822 adapter unlocks advanced functions including all-keys-lost support.

4. ECU Coding, Flashing & Hidden Feature Activation The IK618 supports ECU coding to match new control units, customize vehicle behavior, and activate hidden functions. This includes optimizing fuel efficiency, reducing power loss, and enhancing mechanical component durability. ECU flash configuration also allows users to enable or disable advanced vehicle functions as needed.

5. Full-System Diagnostics & 31+ Special Service Functions The IK618 performs comprehensive diagnostics across all major vehicle systems including ABS, SRS, Engine, Transmission, SAS, BCM, TPMS, and IMMO. Functions include reading and clearing DTCs, live data streaming, freeze frame data, and ECU information retrieval. The 31+ built-in maintenance service functions cover: Oil Reset, EPB Service, SAS Reset, BMS Reset, Throttle Relearn, TPMS Reset, Gearbox Matching, ABS Bleeding, Injector Coding, CAM/Crank Relearn, Fuel Trim Reset, Idle Relearn, ABS Initialization, and more.

6. Full Bi-Directional Control & VAG Guided Functions Active test (bi-directional control) capability allows the IK618 to send direct commands to the ECU for real-time component testing, including EVAP system, fuel injectors, A/C clutch, windows, doors, sunroof, and more. VAG Guided Functions provide step-by-step instructions for VW, Skoda, and other compatible models, simplifying complex procedures and reducing the margin for error.

7. CAN FD Protocol Support & Broad Vehicle Coverage With CAN FD protocol support, the IK618 is fully compatible with GM, GMC, Cadillac, Chevrolet, and Buick models from 2020 onwards. Overall coverage extends to more than 95% of vehicles globally. Please Note: Key programming is supported for Brazil Renault, GM, Fiat, VAG, Russian LADA, Malaysian Perodua / Proton, and France Renault / Megane vehicles.

XTOOL InPlus IK618 Full IMMO & Key Programming Function List

As an upgraded version of the X100 PAD Plus / PADS, the IK618 supports a complete suite of immobilizer and key programming functions, including:

• IMMO Data Backup
• Registered Key Count Check
• PIN Code & Key Info Reading
• Key Fob Programming & Addition
• Dealer Key Generation for VW, Audi, Fiat, Renault, BMW, and Land Rover
• Remote Programming
• All-Keys-Lost Solutions
• EEPROM Modification
• Write-Enable Functions

Please Note: Function availability varies by vehicle. Send the VIN for confirmation prior to purchase.

XTOOL InPlus IK618 KC100 & EEPROM Adapter Included

Right out of the box, the IK618 works seamlessly with the included KC100 programmer to support key programming for VW, Audi, Fiat, Renault, Land Rover, and additional compatible brands. The included EEPROM adapter enables direct EEPROM read and write operations for data backup and recovery on supported modules.

Optional Add-On Programmers – Expand IK618 Capabilities (Sold Separately)

While the KC100 is included with the IK618, the following additional programmers further extend its functionality:

• KC501 – Supports advanced IMMO systems and Mercedes-Benz infrared key reading and writing.
• M821 – Designed for Mercedes-Benz all-keys-lost procedures (requires dedicated Benz cable).
• M822 – Combines M821 functionality with Toyota 8A and 4A all-keys-lost support.
• KS-1 – Dedicated Toyota and Lexus smart key all-keys-lost programmer.
• SK1 – Supports Toyota and Lexus 8A and 4A smart key programming for 2013 to 2022 models.

Extended Key Programming Coverage (with Add-Ons):

• VW, Audi, Skoda, Seat, and Bentley — 4th/5th Generation IMMO and MQB systems
• BMW CAS1 through CAS4
• Mercedes-Benz FBS3 systems
• EEPROM reading and writing for dump modification
• Remote frequency detection and key type identification

XTOOL InPlus IK618 ECU Coding, VAG Guided Functions & OE-Level Diagnostics

Advanced ECU Coding Supports ECU coding for VW, Audi, Skoda, Mercedes-Benz, and Mitsubishi — covering adaptation, system coding, and performance optimization.

Hidden Feature Activation (ECU Configuration) Unlocks a range of vehicle-specific hidden functions such as seat belt buzzer deactivation, window control via key fob, Start/Stop system deactivation, and more. Compatible with BMW, VW, Audi, Skoda, Toyota, Lexus, Scion, Mazda, Ford, and Lincoln.

VAG Guided Functions Provides step-by-step guided procedures for VW, Audi, and Skoda vehicles, simplifying complex operations and reducing the risk of errors during advanced programming and coding tasks.

OE-Level Full-System Diagnostics Performs comprehensive scans across all available ECUs with the following capabilities:

• Reading manufacturer-specific and permanent DTCs
• Clearing fault codes and resetting system monitors
• Viewing real-time live data streams
• Retrieving freeze frame data linked to specific DTCs
• Displaying ECU version and identification information

8-in-1 Live Data Graphing Provides visual graphing of key sensor data — including misfires, RPM, oil temperature, air flow, and fuel pressure — for faster and more accurate diagnostics.

Full Bi-Directional Control – Active Component Testing

The IK618 enables direct component testing without relying on the vehicle's onboard controls, sending commands to the ECU to activate and verify individual systems in real time. Supported active tests include:

• Injector buzz test
• Window, mirror, and door lock operation
• A/C clutch activation and deactivation
• ABS pump and valve testing
• Interior and exterior lighting checks
• Horn activation

XTOOL InPlus IK618 Vehicle Coverage

The IK618 is designed for use by auto mechanics, repair workshops, and dealerships, with broad vehicle coverage spanning multiple global regions.

Regional Coverage

• Russia – LADA and Renault vehicles
• Brazil – Renault, VW, GM, Chevrolet, and Ford vehicles
• Malaysia – Perodua and Proton vehicles
• Europe – Renault Megane III models

Key Programming Coverage by Region

Coverage may vary by model year. Please confirm vehicle compatibility before purchase.

XTOOL InPlus IK618 Package Contents

Accessories & Documentation

• 1x EEPROM PCBA
• 1x Packing List
• 1x Tool Case
• 1x Color Carton
• 1x Tool Carton
• 1x User Manual

Main Units

• 1x IK618 Tablet
• 1x EEPROM Adapter
• 1x US Plug Adapter
• 1x EU Plug Adapter
• 1x UK Plug Adapter
• 1x USB to Type-C Adapter
• 1x Tablet Power Adapter
• 1x KC100 Programmer

Cables & Connectors

• 1x VGA to DB15 Male Main Cable
• 1x USB Cable
• 1x OBD2 16-Pin Connector
• 1x Mini USB to USB-C Cable